Chinese (Simplified)Chinese (Traditional)EnglishFrenchIndonesianJapaneseKoreanRussianThaiKhmerLao

CRADLE

Ritz - Berço

There are three basic cradle solutions to meet a variety of insulator maintenance and replacement requirements.
All are built with RITZGLAS® tubes for work on 110 to 800 kV anchor or suspension strings.

-    Single Insulator Cradles
It is generally used in 110 to 230 kV strings, supported by a pair of wire tongs or strain link stick.

-    Cradle with fittings
It is used in 345 to 500 kV strings and in combination with cradle supports to allow insulators movement.

-    Cradle with bracket (side opening) for extra high voltage
It is used in anchor strings up to 800 kV to allow single or multiple string removal. 

Single Insulator Cradles


Ritz - Berço Simples


It is used to change insulators in the string itself or to lower it to the ground. In anchor strings or angled strings, this cradle is used in conjunction with support rods. As for “I” suspensions, strain poles are used.

Constructed with Ø 38 mm RITZGLAS® tubes, this series of single cradles has two steel pins at their front, which are used to support the insulator string with a pair of wire tongs or strain link stick.

At the rear of the crib there are large eyes and ropes for coupling to the structure as an anchor point. In this way, the insulators can be raised or lowered to a more suitable position for replacement.

When lowering the insulator string is not necessary, the cradles are mounted to the eyes located on the yokes coupled to the strain poles.

TRANSMISSION INSULATOR CRADDLES

Catalog ReferenceMaximum CapacityInsulating Length
(m)
Approx. Weight
kgkg
 RH1840-46 insulators up to Ø 254 mm1,225,80 12,79
 RH1840-610 insulators up to Ø 254 mm1,837,00 15,43
 RH1840-814 insulators up to Ø 254 mm2,448,30 18,30
 RH1840-1018 insulators up to Ø 254 mm3,0512,20 26,90
 RH1840-1222 insulators up to Ø 254 mm3,6614,70 32,41

 

SPARE PARTS AND COMPONENTS

Catalog ReferenceDescriptionApprox. Weight
kgkg
 FLV19067-1Cradle center spacer0,801,76
 FLV17458-1Metal spacer with side cradle holders1,002,20
 FLV17445-1Metal spacer with side eyes and 2.50 m insulating rope at its cradle ends1,603,53
 RH4540RITZGLAS® tube, Ø 38 mm x 1.22 m, with plastic end fitting0,901,98
 RH4540-1RITZGLAS® tube, Ø 38 mm x 1.83 m, 
with plastic end fitting
1,302,87
 RH4540-2RITZGLAS® tube, Ø 38 mm x 2.44 m, with plastic end fitting1,703,75
 RH4540-3RITZGLAS® tube, Ø 38 mm x 3.05 m, with plastic end fitting2,104,63
 RH4540-4RITZGLAS® tube, Ø 38 mm x 3.65 m, with plastic end fitting2,505,51

 

<

Cradle with fittings


Ritz - Berço com Encaixe


It is used to change insulators in strings up to 500 kV. It is also required to lower “V” or anchor insulator strings and to lift “I” suspension insulators.

The deep design of the cradle is a safe way to prevent accidental fall of the insulator string. In addition, it is reinforced by the upper insulator retaining plate, which securely holds it during transport.

The insulator plate has dual use: on one side fits insulators up to Ø 273 mm; and, on the opposite side, it adapts to insulators up to Ø 286 mm.

The cradle can be easily lowered or lifted for insulator change through the forged steel swivel eyes at one end and the other with the aid of the steel handle (R070184) attached to a strain link stick, and it also has an auxiliary hook (R068922).

The steel strap and hook are supplied with the cradle.

 

EHV THROUGH DESIGN INSULATOR CRADLES

Catalog ReferenceMaximum CapacityInsulating Length
(m)
Approx. Weight
kglb
 RC401-001525 insulators up to Ø 286 mm3,4016,40 36,16
 RH1950-919 insulators up to Ø 286 mm2,6914,90 32,85

PARTES E COMPONENTES PARA REPOSIÇÃO

Catalog ReferenceDescriptionApprox. Weight
kgkg
FLV17453-1Cradle center metal spacer1,603,53
FLV17446-1Aluminum cradle plate2,605,73
 FLV17447-1Metal spacer with side cradle holders1,603,53
 R068922Plastic coated steel hook0,551,21
 R070184Galvanized steel handle1,102,43
 FLV18594-4Ø 38mm RITZGLAS® tube for RC401-0015, 
with plastic terminal and metal head
3,237,12
 FLV18593-4Ø 38mm RITZGLAS® tube for RC401-0015, 
with plastic terminals
2,605,73
 FLV18594-3Ø 38mm RITZGLAS® tube for RH1950-9, 
with plastic terminal and metal head
2.705.95
FLV18593-3Ø 38mm RITZGLAS® tube for RH1950-9, 
with plastic terminals
2.074.56

 

<

 

Cradle Support


It is made with Ø 64 mm RITZGLAS® tube and its main structure has a heat-treated aluminum head with forged steel swivel eye and three pairs of hooks, which are coupled to a spiral link pole and act as a support.

CRADLE SUPPORT
Catalog ReferenceMaximum CapacityInsulating Length 
(m)
Rated Work CapacityApprox. Weight
daNlbkglb
 RH1950-90Cradle support with 3 pairs of hooks2,9722750013,40 29,54

Ritz - Cradle

Support Cradle


It has been developed for the selective removal of a single insulator string, particularly, in double, triple, or quadruple anchor strings. Using this cradle, it is not necessary to remove the upper strings to extract the lower strings.

Constructed with Ø 64 mm RITZGLAS® tube as its main element, it has three Ø 38 mm pipes.

The tubes has swiveling eyes at its ends.
0.38 m hooks are used in mountings with single or double anchor strings, while with the 0.79 m hook is used to remove quadruple lower anchor strings.

The insulator plate has dual use: on one side fits insulators up to Ø 279 mm; and, on the opposite side, it adapts to insulators up to Ø 324 mm.

In conjunction with the cradle, tie rods are provided for coupling to the boom pole, a plate for retaining the upper insulator, hook arrangements, and metal spacers.

EHV SIDE-OPENING INSULATOR CRADLES
Catalog ReferenceDescriptionRated Work CapacityApprox. 
Weight.
daNlbkglb
 RC401-0354Long insulating cradle of 4.83 m , 4 long support hooks of 0.38 m, 2 metal spacers and 1 plate454100066,00 136,69
 RC401-0355Long insulating cradle of 4.83 m , 4 long support hooks of 0.79 m, 2 metal spacers and 1 plate64,00 141,10
 RC401-0356Long insulating cradle of 3.91 m , 4 long support hooks of 0.38 m, 2 metal spacers and 1 plate58,50 128,97
 RC401-0357Long insulating cradle of 3.91 m , 4 long support hooks of 0.79 m, 2 metal spacers and 1 plate60,50 133,38
 RC401-0358Long insulating cradle of 2.69 m , 3 long hooks of 0.38 m  and 1 plate

227 

50042,60 93,92
 RC401-0359Long insulating cradle of 2.69 m , 3 long hooks of 0.79 m  and 1 plate44,00 97,00

 

Ritz - Partes e Componentes para Reposição

 

SPARE PARTS AND COMPONENTS
ItemCatalog ReferenceDescriptionApprox. Weight
kglb
1FLV01852-1Cradle tie rod support11,152,54
2RC401-0361Cradle support hook with ® Ø 51 x 390 mm RITZGLAS®4,509,92
RC401-0362Cradle support hook with ® Ø 51 x 810 mm RITZGLAS®5,7012,55
3FLV03460-1Cradle metal spacer2,605,73
4RC401-0455Insulator plate3,156,95
5RE402-0138Ø 64 mm clamp for rod0,801,75
6FLV18595-1Ø 64 X 4830 mm (insulated) RITZGLAS® tube with plastic terminal and eye head8,8019,40
FLV18595-2Ø 64 X 3890 mm (insulated) RITZGLAS® tube with plastic terminal and eye head7,4516,42
FLV18595-3Ø 64 X 2675 mm (insulated) RITZGLAS® tube with plastic terminal and eye head5,4011,90
7FLV18594-1Ø 38 X 4835 mm (insulated) RITZGLAS® tube with plastic terminal and eye head4,509,92
FLV18594-2Ø 38 X 3920 mm (insulated) RITZGLAS® tube with plastic terminal and eye head3,607,94
FLV18594-3Ø 38 X 2705 mm (insulated) RITZGLAS® tube with plastic terminal and eye head2,605,75
8FLV18593-1Ø 38 X 4874 mm RITZGLAS® tube with plastic terminal3,908,60
FLV18593-2Ø 38 X 3954 mm RITZGLAS® tube with plastic terminal2,956,50
FLV18593-3Ø 38 X 2734 mm RITZGLAS® tube with plastic terminal2,204,85
9FLV03457-2Ø 38 x 349 mm (insulated length) RITZGLAS® pole with tie-down head (clevis type) and eye head2,154,74
FLV03457-3Ø 38 x 806 mm (insulated length) RITZGLAS® pole with tie-down head (clevis type) and eye head2,505,52
FLV03457-5Ø 38 x 1263 mm (insulated length) RITZGLAS® pole with tie-down head (clevis type) and eye head2,856,28
FLV03457-6Ø 38 x 1416 mm (insulated length) RITZGLAS® pole with tie-down head (clevis type) and eye head3,006,61

Write a review

Note: HTML is not translated!
   Bad           Good

CRADLE

  • Brands RITZ
  • Product Code:CRADLE
  • Availability:In Stock

Tags: RITZ

K & P Intertrade Co., Ltd. - Certify

กรมพัฒนาธุรกิจการค้า Trustmarkthai

สินค้าของเรา

เครื่องกำเนิดไฟฟ้า · รอกยกของ · ไม้ชักฟิวส์ · ไม้ฉนวน · บันไดสไลด์ · มีดปอกสาย · ชุดประกอบฉนวนค้ำยันสายไฟ · Ratchet Hoist แบบผ้าใบ · Ratchet Cable Cutter · Insulator Cover · InsulatedHanger · Conductor Cutter with Insulated Handles · Conductor Cover 46 kv · Clamp stick grip all type ขนาด 8 ฟุต · Clamp Stick grip all type ขนาด 12 ฟุต · สว่านไร้สาย · ล้อวัดระยะทาง · ประแจบล๊อคไฟฟ้าไร้สาย (BRUSHLESS CORDLESS IMPACT WRENCH) · เทปวัดระยะชนิดโลหะ · ตู้แผงสวิตช์ · ตู้เก็บเครื่องมือ · เครื่องอัดลมใช้มอเตอร์ไฟฟ้า · เครื่องมือบีบหลอดต่อสายไฮดรอลิค · เครื่องมือบีบคอนเนคเตอร์ แบบ H · เครื่องมือต่อสายลงดิน (Grounding Equipment) · เครื่องมือจับและดึงสาย (Wire Grip Come Along) Overall outside · เครื่องดึงสาย (Coffing Hoist) · อุปกรณ์ระบบไฟฟ้า · สวิตซ์ตัดตอนแรงสูง · หางปลา · หลอดต่อสาย · สลักเข้าปลายสาย · พีจีคอนเนคเตอร์ · ฉนวนป้องกันไฟฟ้าลัดวงจร · ฉนวนครอบล่อฟ้า · เครื่องมือช่างไฟฟ้าอุตสาหกรรม · เครื่องมือไฮดรอลิก · เครื่องมือแบตเตอรี่ไร้สายดิสคอนเนคติ้งสวิตซ์แบริเออร์ · ฉนวนครอบบุชชิ่ง · ตาข่าย · แผ่นอลูมิเนียม · ฉนวนครอบดรอปเอาท์ฟิวส์ · หนามป้องกันสัตว์ · อุปกรณ์ระบบไฟฟ้า · หม้อแปรงไฟฟ้า · ROADMAPTOSTRONGGRIDLV · แคล้มป์สติ๊ก · ClampStick · เชือกใยยักษ์ · เชือก Handline · KNIPEX · เครื่องตรวจจับแรงดันไฟฟ้า · UNI · สายกันตก · UNI9103 · เข็มขัดปีนเสา · YQK · SME · ขายดี · หมวกปีกรอบ · หมวกนิรภัย S-Guard · MSA V-Gard full brim · คีมตัดสาย · คัทเตอร์ตัดสาย · CableCutter · คีมตัดลวดเหล็ก · คัทเตอร์เฟืองทด · คัทเตอร์ตัดสายเคเบิ้ล · คีมย้ำ · คีมบีบ · แคล้มป์สติ๊ก · KANDP · Milwaukee · CHANCE · RITZ · KUDOS · ZUPPER  · FLUKE · Klauke Hydraulic Crimp Tool · Google · 




Official Facebook Page

เนื้อหาส่วนนี้อาจไม่แสดงกรณีใช้ผ่านมือถือบางรุ่น ทางบริษัทฯ ขออภัยในความไม่สะดวก

4 TOP Facebook Official Page Post

เนื้อหาส่วนนี้อาจไม่แสดงกรณีใช้ผ่านมือถือบางรุ่น ทางบริษัทฯ ขออภัยในความไม่สะดวก


Chinese (Simplified)Chinese (Traditional)EnglishFrenchIndonesianJapaneseKoreanRussianThaiKhmerLao