Fluke 414D/62 MAX+ Laser Distance Meter/Infrared Thermometer Combo Kit

Key features

The 414D reduces errors, saves time and money

• The most advanced laser technology for distance measurement
• Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in)
• Quick calculation of area (square feet/meters) and volume 
• Pythagoras function indirectly measures height via two other measurements
• Stores up to five measurement results
• Battery life of 3000 measurements with automatic shut-off feature

Fluke 62 MAX+. Small in size. Big on toughness

• Dust and water-resistant: IP54 rated
• Rugged: 3-meter (9.8-foot) drop tested
• Ergonomically designed: Completely redesigned for a more natural hand fit
• Distance to spot: 12:1
• Dual lasers: Identifies area to be measured
• Large, backlit display: Makes data easier to read, even in dark areas

Download the product manualDownload the data sheet

Specifications: Fluke 414D/62 MAX+ Laser Distance Meter/Infrared Thermometer Combo Kit

Fluke 414D Laser Distance Meter

Distance Measurement
Typical Measuring Tolerance ¹	±2.0 mm ³
Maximum Measuring Tolerance ²	±3.0 mm ³
Range At Leica Target Plate GZM26	50 m / 165 ft
Typical Range ¹	40 m / 130 ft
Range At Unfavorable Condition 4	35 m / 115 ft
Smallest Unit Displayed	1 mm / 1/16 in
Ø Laser Point At Distances	6 / 30 / 60 mm (10 / 50 / 100 m)
Tilt Measurement
Measuring Tolerance To Laser Beam 5	No
Measuring Tolerance To Housing 5	No
Range	No
General
Laser Class	2
Laser Type	635 nm, < 1 mW
Protection Class	IP40
Automatic Laser Off	After 90 seconds
Automatic Power Off	After 180 seconds
Battery Life (2 x AAA) 1.5 V NEDA 24A/IEC LR03	Up to 3,000 measurements
Size (L x W x D)	116 x 53 x 33 mm
Weight (with batteries)	113 g
Temperature Range: Storage Operation	-25 °C to +70 °C (-13 °F to +158 °F)
	0 °C to +40 °C (32 °F to +104 °F)
Calibration Cycle	Not applicable
Maximum Altitude	3000 m
Maximum Relative Humidity	85% at 20 °F to 120 °F (-7 °C to 50 °C)
Safety	IEC Standard No. 61010-1:2001
	EN60825-1:2007 (Class II)
EMC	EN 55022:2010
	EN 61000-4-3:2010
	EN 61000-4-8:2010
1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25 °C. 2. Applies for 10 to 500% target reflectivity, high background illumination, -10 °C to +50 °C. 3. Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m. 4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux. 5. After user calibration. Additional angle related deviation of ±0.01 ° per degree up to ±45 ° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1 °

Fluke 62 MAX+ Infrared Thermometer

Specifications
Temperature Range	-30 °C to 650 °C (-22 °F to 1202 °F)
Accuracy	±1.0 °C or ±1.0% of reading, whichever is greater
	-10 °C to 0 °C: ±2.0
	-30 °C to -10 °C: ±3.0
Response Time (95%)	Fluke 62 MAX+	< 300 ms (95% of reading)
	Spectral response	8 to 14 microns
	Emissivity	0.10 to 1.00
Optical Resolution	12:1 (calculated at 90% energy)
Display Resolution	0.1 °C (0.2 °F)
Repeatability Of Readings	±0.5% of reading or < ±0.5 °C (1 °F), whichever is greater
Power	AA battery
Battery Life	8 hours with laser and backlight on
Physical Specifications
Weight	255 g (8.99 oz)
Size (L x W x D)	175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)
Operating Temperature	0 °C to 50 °C (32 °F to 122 °F)
Storage Temperature (Without Battery)	-20 °C to 60 °C (-4 °F to 140 °F)
Operating Humidity	10% to 90% RH non-condensing at 30 °C (86 °F)
Operating Altitude	2000 meters above mean sea level
Storage Altitude	12,000 meters above mean sea level
IP Rating	IP 54 per IEC 60529
Drop Test	3 meters
Vibration And Shock	IEC 68-2-6 2.5 g, 10 to 200 Hz
	IEC 68-2-27, 50 g, 11 ms
EMC	EN 61326-1:2006
	EN 61326-2:2006
Standards And Agency Approval
Compliance	EN/IEC 61010-1: 2001
Laser Safety	FDA and EN 60825-1 Class II