Fluke 417D Laser Distance Meter / 62 MAX+ IR Thermometer Kit

Key features

Fluke 417D Laser Meter

• The Fluke 417D laser meter is accurate, durable, and easy to use—just point and shoot
• Instantly measure up to 40 m (131 ft.) with 1-button point-and-click

Fluke 62 MAX+ IR Thermometer

• Distance to spot: 12:1
• Dual lasers: Identifies area to be measured

Download the product manualDownload the data sheet

Specifications: Fluke 417D Laser Distance Meter / 62 MAX+ IR Thermometer Kit

Fluke 417D Laser Distance Meter

417D
Typical range [1]	0.2-40 m/0.6-131 ft
Typical measuring tolerance* [1]	2.0 mm ± 1.5 mm/± 0.06 in ***
Maximum measuring tolerance [2]	± 3.0 mm/0.12 in ***
Accuracy up to 10m (+/-)	± 2 mm
Display	2 line/1 mm/1/32 in
Display illumination	Yes
Laser point at distance	6/30/60 mm (10/40/100 m)
Area	Yes
Units setting (smallest units displayed)	0,000m, 0' 00'' 1/32, 0 in 1/32
Auto laser switch off	90 sec
Auto power switch off	180 sec
General
Laser class	II
Laser type	635 nm, <1 mW
Protection class	IP54
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03	Up to 3,000 measurements
Size (Hx W x D)	11.9 x 3.8 x 2.6 cm
Drop test	1 meter
Weight (with batteries)	95g (3.35 oz)
Temperature range: Storage	-25 °C to 70 °C (-13 °F to 158 °F)
Temperature range: Operation	-10 °C to 50 °C (14 °F to 122 °F)
Calibration cycle	Not applicable
Maximum relative humidity	85 % @ 20°F to 120 °F (-7 °C to 50 °C)
Safety	CAN/CSA-C22.2 No. 61010-1-04, UL Std. No. 61010-1 (2nd Edition), ISA-82.02.01, IEC Standard No. 61010-1:2001, EN60825-1:2007 (Class II)
EMC	61326-1:2006

[1] Applies for 100 % target reflectivity (white painted wall), low background illumination, 25 °C (13 °F).

[2] Applies for 10 % to 500 % target reflectivity, high background illumination, -10 °C to +50 °C (14 °F to +122 °F).

[3] Tolerances apply from 0.05 m to 10 m (0.001 ft to 32.8 ft) with a confidence level of 95 %. The maximum tolerance may deteriorate to 0.1 mm/m (0.003 in/ft) between 10 m to 30 m (32.8 ft to 98.4 ft) and to 0.15 mm/m (0.005 in/ft) for distances above 30 m (98.4 ft).

[4] Applies for 100 % target reflectivity, background illumination between 10,000 lux and 30,000 lux.

[5] After user calibration. Additional angle related deviation of ± 0.01° per degree up to ± 45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ± 0.1°.

Fluke 62 MAX+ IR Thermometer

62 MAX+
Temperature range	- 30 °C to 650 °C (-22 °F to 1202 °F)
Accuracy (Calibration geometry with ambient temperature 23 °C +/- 2 °C)	± 1.0 °C or ± 1.0 % of reading, whichever is greater ± 2.0 °C at -10 °C to 0 °C ± 3.0 °C at -30 °C to -10 °C
Optical resolution	12:1 (calculated at 90 % energy)
Response time (95 %)	< 300 ms (95 % of reading)
Spectral response	8 to 14 microns
Emissivity	0.10 to 1.00
Display resolution	0.1 °C (0.2 °F)
Repeatability (% of reading)	± 0.5 % of reading or ± 0.5 °C (whichever is greater)
Power	1 AA alkaline battery
Battery life	8 hours with laser and backlight on
Weight	255 g (8.99 oz)
Size	(175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches
Operating temperature	0 °C to 50 °C (32 °F to 122°F)
Storage temperature	-20 °C to 60 °C (-4 °F to 140 °F) (without battery)
Operating humidity	Non- condensing @ ≤ 10 °C (50 °F) ≤ 90 % RH @ 10 °C (50 °F) to 30 °C (86 °F) ≤ 75 % RH @ 30 °C (86 °F) to 40 °C (104 °F) ≤ 45 % RH @ 40 °C (104 °F) to 50 °C (122 °F)
Operating altitude	2000 meters above mean sea level
Storage altitude	12,000 meters above mean sea level
Drop test	3 meters
Implement standard	Q/ASF01
Standards and agency approval
Compliance	IEC 61010-1: Pollution Degree 2
Laser safety	IEC 60825-1 Class 2, 650 nm, < 1 mW
Ingress protection rating	IP 54 per IEC 60529
Warranty	3 years