Fluke 424D Laser Distance Meter

Key features

• Versatile laser distance meter that instantly measures up to 100 meters (330 feet) with one-button point-and-click operation
• Quickly calculates area (square feet/meters) and volume
• Includes 180° inclination sensor for leveling and height tracking
• Offers enhanced Pythagoras calculation for determining distance indirectly from three other measurements 

Download the product manualDownload the data sheet

Specifications: Fluke 424D Laser Distance Meter

Distance Measurement
Typical measuring tolerance 1	±1.0 mm 3
Maximum measuring tolerance 2	±2.0 mm 3
Range At Leica Target Plate GZM26	100 m / 330 ft
Typical range 1	80 m / 260 ft
Range at unfavorable condition 4	60 m / 195 ft
Smallest unit displayed	6 / 30 / 60 mm (10 / 50 / 100 m)
Ø Laser point at distances	6 / 30 / 60 mm (10 / 50 / 100 m)
Tilt Measurement
Measuring tolerance to laser beam 5	±0.2°
Measuring tolerance to housing 5	±0.2°
Range	360°
General
Laser cass	2
Laser type	635 nm, < 1 mW
Protection class	IP54
Automatic laser off	After 90 seconds
Automatic power off	After 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03	Up to 5,000 measurements
Size (L x W x D)	127 x 56 x 33 mm
Weight (with batteries)	158 g
Temperature range Storage operation	-25°C to +70°C (-13°F to +158°F)
	-10°C to +50°C (14°F to +122°F)
Calibration cycle	Tilt and compass
Maximum altitude	3000 m
Maximum relative humidity	85% at 20°F to 120°F (-7°C to 50°C)
Safety	IEC Standard No. 61010-1:2001
	EN60825-1:2007 (Class II)
EMC	EN 55022:2010
	EN 61000-4-3:2010
	EN 61000-4-8:2010
1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C. 2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C. 3. Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m. 4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux. 5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.